Parabody GS2 Manuel d'utilisateur télécharger pdf (Page 10)

FIGURE 8

STEP 8:

• Place PRESS ARM (8) into PRIMARY PIVOT (9) and securely tighten using two 3/8 X 3” BOLTS (29), four 3/8” FLAT

WASHERS (36) two 3/8” LOCK NUTS (34)

• Insert and tighten two 3/8” TAPER/LOCK SPRING PINS (49) into PRESS HANDLES (6), (7).

TIGHTEN

20lbs/ft

• Lock PRESS ARMS (6), (7) into place using 3/8” LOCKING SPRING PINS (49)

Taper/Lock

Spring Pin

• Insert one OVAL END CAP (66) into openning of each arm as shown in FIGURE 8

3/8 X 3”

• To disengage LOCKING SPRING PINS (49), pull out and twist 1/4 turn.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Parabody GS2 Manuel d'utilisateur Page 10