Parabody 778 Manuel d'utilisateur

1778 LEG PRESS ADAPTER KITFOR 777 GYM SYSTEMCLASS HPART # 7031501REV. BVersion: 778101Revision: 02/28/01USER’S GUIDEWARNING:Read and follow all direct

10 FIGURE 8STEP 8• Securely fasten the 100 LEG PRESS to the FRONT LEG (1) using two 3/8 X 3” BOLTS (10), four 3/8” WASHERS (7), and two3/8” LOCK

FIGURE 9STEP 9:11• SECURELY assemble the previously removed 3-1/2” PULLEY to the FRONT LEG (1) using one 3/8 X 1-3/4” BOLT (9) and one3/8” LOCK

12 FIGURE 10STEP 10• Screw the threaded end of LEG PRESS CABLE (4) to the PULLEY BRACKET (2) as shown in FIGURE 10. 4 2

FIGURE 11STEP 11• The 100 LEG PRESS is equipped with a spring pin adjustment to accommodate different sized users and allow easy entry and exitf

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OFEQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!1. Before using, read all the warnings and

IMPORTANT NOTESPlease note:Tools Required for Assembly* Thank you for purchasing the ParaBody 778 LEG PRESS ADAPTER KIT. Please read these instruct

4Minimum Required Usable SpaceLength = 90 inches (229 cm) 7’ 6”Width = 103 inches (262 cm) 8’ 7”Height = 84 inches (213.5 cm) 7”1 Square = 1’

PARTS LIST5PART #703130870067086987802703170131162016467001KEY123456QTY111112PART #31025013102802310292431029043102935DESCRIPTION3/8” WASHER3/8” LOCKN

6 FIGURE 2STEP 2:• Route the 120” CABLE (3) around the pulley in the BOOM PLATES as shown in FIGURE 2. (NOTE: Make sure the cableruns in the groo

FIGURE 3STEP 3• Slide two 2” SQ. COVER CAPS (6) over the FRONT LEG (1) as shown in FIGURE 3. 1 67 FIGURE 4STEP 4:• Remove the 3/8 X 3-3/4”

8 FIGURE 5STEP 5:• SECURELY assemble the FRONT LEG (1) to the 777 Gym System using two 3/8 X 4-1/2” BOLTS (11), five 3/8” WASHERS(7), one previo

9 FIGURE 6STEP 6• Remove one existing 3-1/2” PULLEY, twoWASHERS, two 2” WHEELS and two SPACERSfrom the ADJUSTMENT TUBE on the 100 LEGPRESS OPTION