Parabody 778 Manuel d'utilisateur télécharger pdf (Page 9)

FIGURE 6

STEP 6

• Remove one existing 3-1/2” PULLEY, two

WASHERS, two 2” WHEELS and two SPACERS

from the ADJUSTMENT TUBE on the 100 LEG

PRESS OPTION by unfastening the 3/8 X 4-1/2”

BOLT holding the pulley on. See FIGURE 6.

(NOTE: The pulley will be used in STEP 9.)

3-1/2” PULLEY

2” WHEEL

3/8 X 4-1/2”

BOLT

SPACER

FIGURE 7

STEP 7

• Assemble the LEG PRESS CABLE (4) to the ADJUSTMENT TUBE on the 100 LEG PRESS using the existing previously

removed 3/8 X 4-1/2” BOLT, SPACERS, WASHERS, 2” WHEELS AND NUT. (Note: Do not overtighten! Tighten only until

nut is completely on bolt.) See FIGURE 7.

2” WHEEL

3/8 X 4-1/2” BOLT

NUT

WASHER

SPACER

DO NOT

OVERTIGHTEN!

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Parabody 778 Manuel d'utilisateur Page 9